Dual-Head Layout and Where It Fits
Two heads with 12 or 15 needles per head give the AS-BC1202 a useful middle ground. It is more productive than a single-head unit because two garments or two caps progress together, without stepping up to a long multi-head bridge. The maximum embroidery area of 450 x 400 mm covers standard front panels, chest logos and sleeve placements; on cap frames the usable sewing area is set by the frame and is confirmed on quotation. Multiple hoop sizes are available so operators can match the hoop to the job rather than forcing every design onto one frame.
Because it handles flats, caps and finished garments, one machine can serve several order types: flat panels and patches, structured caps, and already-sewn shirts or jackets that cannot be disassembled. Buyers comparing layouts can review the wider range of cap embroidery machines or step back to the category overview of computerized embroidery machines before deciding whether two heads or a single head is the better starting point.
Cap System and Embroidery Capability
The 270-degree cap system allows the cap frame to rotate through a wide sewing arc, which is what makes curved crown panels and side placements practical on a two-head frame. Beyond standard thread embroidery, the machine is applicable to sequin, cording and beading work, so decorative trims can be added without a second machine. Automatic thread trimming and thread break detection reduce operator attention per piece: trimming keeps the underside clean between colour changes, and break detection stops the head so a broken thread does not ruin the rest of the design.
Motors, Power and Control
A 150 W servo motor drives the machine, while DC36V micro-step X/Y motors position the frame. Micro-step control supports fine, repeatable movement on detailed logos and small lettering. The built-in universal power supply is self-adaptable worldwide, which simplifies planning for buyers whose workshop voltage differs from the market the machine was configured for. An emergency stop is fitted for operator safety.
Design files are handled in DST and DSB formats and loaded through USB or LAN input. The USB port is recessed, protecting the connector and the stick from knocks on a busy table. Automatic memory retention keeps the current design and position in memory across power interruptions, so work can resume without reloading. The interface offers 13 languages, which helps where operators are trained in different languages or where staff turnover is high.
Specifications
| Item | AS-BC1202 |
|---|---|
| Heads | 2 |
| Needles per head | 12 or 15 |
| Maximum embroidery area | 450 x 400 mm |
| Maximum speed | 1,200 rpm |
| Memory capacity | 100 million stitches or 400 design patterns |
| Screen | 10-inch HD true-color LCD touch screen |
The 10-inch HD true-color LCD touch screen is the main operating point for design selection, colour sequencing and machine status. Memory capacity of 100 million stitches or 400 design patterns means a shop can keep its regular order book on the machine instead of swapping sticks for every repeat job. Maximum speed is 1,200 rpm; actual running speed depends on the design, fabric and application, and the supplier positions the model as suitable for startups and growing embroidery businesses. Buyers weighing a two-head machine against a one-head machine can read the single head embroidery machines selection guide for a like-for-like comparison of workload and floor space.
Heavy-Duty Stand and Daily Handling
The machine sits on a heavy-duty steel stand with wheels. The steel frame keeps the two heads stable during high-speed sewing, which matters for stitch registration when both heads run the same design, and the wheels let a small workshop move the unit between stations or stow it against a wall when floor space is tight. Stability and mobility are usually competing priorities on light frames, so this combination is worth checking during a site visit or video demonstration.
Buyer Checklist
Before requesting a price, confirm the following:
- Head and needle configuration: two heads with 12 or 15 needles per head.
- Embroidery area against your largest design: 450 x 400 mm maximum.
- Cap work: confirm the 270-degree cap system and the cap frames you will need.
- Application mix: flat, cap and finished-garment work, plus sequin, cording or beading if required.
- File workflow: DST and DSB formats, USB or LAN transfer, recessed USB port.
- Power: confirm your site voltage against the built-in universal power supply.
- Hoop sizes: list the frames needed for your typical order sizes.
- Language: confirm your operator language is among the 13 interface languages.
- Training and support: ask about installation and debugging, after-sales maintenance and spare parts supply.
- Certificates: Certificates available upon request.
- Commercial terms: MOQ and lead time are confirmed on quotation.
Specifications are confirmed on quotation, so state your exact configuration, voltage and hoop requirements in your enquiry. To request a quotation for the AS-BC1202, contact us through the contact page with your application details and we will confirm the configuration and commercial terms for your order.